The Series 1900 is a split serrated restraint harness for restraining C900 PVC Pipe Joints. It's comprised of two split serrated restraint rings; one on the plain end or spigot of pipe and the other behind the bell. They are fastened into a harness by an array of thrust rods. The 1900 is rated to the full pressure of AWWA C900 PVC Pipe.
Available in sizes 4 inch through 12 inch.
The Series 1500 is a split serrated restraint harness for restraining C900 PVC Pipe Joints. It's comprised of two split serrated restraint rings; one on the plain end or spigot of pipe and the other behind the bell. They are fastened into a harness by an array of thrust rods.
Available in sizes 4 inch through 12 inch.
The Series 1600 is a split serrated restraint harness for restraining C900 PVC Pipe Joints. It's comprised of one split serrated restraint ring that goes on the plain end or spigot end and a split non-serrated ring that goes on behind the bell. They are fastened into a harness by an array of thrust rods.
Available in sizes 4 inch through 12 inch.
The Series 2800 is a restraint harness for C900 pipe bells. The MEGALUG restraint ring and bell ring are made of ductile iron. The simple installation procedure and proven restraint capability make this the best restraint available for new installations.
Available in sizes 14 inch through 54 inch.
The Series 1100HV restrains existing pipe bell joints on AWWA C900 PVC Pipe. The split restraints and 'offset' tie bars are made of ductile iron conforming to ASTM A536.
Available in sizes 14 inch through 30 inch.
The Series 2500 Restraint Harness for AWWA C907 PVC Fittings is quick and easy to install. The Harness comes in two configurations dependent on pipe size. AWWA C900 PVC pipe sizes 4 inch through 12 inch has a split serrated restraint ring for the plain end or spigot end of pipe, and a split non-serrated bell ring that goes just behind the gasket race hump and is fastened into a harness by an array of thrust rods.
Available in sizes 4 inch through 48 inch.
The Series 2600 Restraint Harness for AWWA C907 PVC Fittings is quick and easy to install. The restraint for AWWA C900 or C909 PVC pipe sizes 4 inch through 12 inch has a split serrated restraint ring for the plain end or spigot end of pipe, and a split non-serrated bell ring that goes just behind the gasket race hump and is fastened into a harness by an array of thrust rods.
Available in sizes 4 inch through 12 inch.
The Series 19PF00 is designed for restraining ductile iron fittings supplied with restraining ears on AWWA C900 PVC Pipe. The restraint is a split serrated ring with thrust rods that rod back to the fitting. The Restraint is rated for the full pressure of C900 PVC pipe.
Available in sizes 4 inch through 12 inch.
The Series 15PF00 is designed for restraining AWWA C900 PVC Pipe at Push on Ductile Iron Fittings supplied with restraining ears. The restraint is a split serrated ring with thrust rods that rod back to the fitting.
Available in sizes 4 inch through 12 inch.
The Series 1500TD Tru-Dual Restraint is a split serrated restraint for push-on pipe, both ductile iron pipe bells and AWWA C900 PVC pipe bells. It is composed of a split serrated restraint ring that is assembled on the spigot and a split serrated restraint ring that is assembled behind the bell. Both split rings have heat treated Tru-Dual inserts that grip both Ductile Iron Pipe and PVC C900 Pipe.
Available in sizes 4 inch through 12 inch.
The Series 1600TD Tru-Dual Restraint is a split serrated restraint for push-on pipe, both ductile iron pipe bells and AWWA C900 PVC pipe bells. It is composed of a split serrated restraint ring that is assembled on the spigot and a split non-serrated restraint ring that is assembled behind the bell. Both split rings have heat treated Tru-Dual inserts that grip both Ductile Iron Pipe and PVC C900 Pipe.
Available in sizes 4 inch through 12 inch.
The Series 15PF00TD is a split, serrated restraint for Ductile Iron Pipe and AWWA C900 PVC pipe at Ductile Iron Fittings. It is composed of a split serrated restraint ring with heat treated Tru-Dual inserts. The restraint is installed on the spigot end of the pipe and connects to the fitting with an array of thrust bolts.
Available in sizes 4 inch through 12 inch.
Properly and quickly assemble pipe joints each and every time. Improper installation and over-insertion can contribute to the build up of damaging stresses in pipe joints.The MEGA-STOP is a safe and economical "over-insertion" solution.
Available in sizes 4 inch through 16 inch.
Our submittal packages will contain the product brochure, the sample specification document, and a CAD file for the product if there is one available.