Skip to content

Our American-Made products meet all federal AIS/BABAA Regulations.

DOWNLOAD AIS/BABAA CERTIFICATES

Mechanical Joint Restraints

EBAA Mechanical Joint Restraints

MEGALUG – The Ultimate in Mechanical Joint Restraints

EBAA Iron, the leader in water and waste-water pipeline joint technologies, offers the MEGALUG Mehcanical Joint (MJ) Restraints for the following pipe materials:

1100 MEGALUG®

1100 MEGALUG®

  • MEGALUG® Mechanical Joint Restraint
  • Available is sizes 3" to 60"
The Series 1100 MEGALUG® Mechanical Joint Restraints effectively and economically restrain Ductile Iron Pipe (DIP) to mechanical joints above or below ground, for practically any application including valves, hydrants, and pipe. For use on all classes of ductile iron pipe (PC350 through PC150 and CL56 through CL50) without damage to the pipe or cement linings. It can also be used on steel pipe and cast iron pipe when joining to mechanical appurtenances, see product brochure for more details on these pipes.
1100TDM MEGALUG®

1100TDM MEGALUG®

  • Tandem MEGALUG® Mechanical Joint Restraint
  • Available is sizes 4" to 54"
The Series 1100TDM Tandem MEGALUG restrain ductile iron pipe to mechanical joint fittings, pipe and appurtenances that require high PSI ratings. It consists of one Series 1100 MEGALUG and one Series 1100 MEGALUG with the MJ lip removed as to sit properly behind the first.
1100SD Split MEGALUG®

1100SD Split MEGALUG®

  • Split MEGALUG® for Restraining Existing Mechanical Joints
  • Available is sizes 3" to 60"
The Series 1100SD is a split MEGALUG designed to restrain existing mechanical joints on valves, fittings, hydrants and other pipeline apperturances for ductile iron pipe.
15MJG00TD Tru-Dual®

15MJG00TD Tru-Dual®

  • Tru-Dual® Mechanical Joint Restraint
  • Available is sizes 4" to 12"
The Series 15MJG00TD is a split, serrated restraint for Ductile Iron Pipe and AWWA C900 PVC pipe at Ductile Iron Mechanical Joint Fittings. It is composed of a split serrated restraint ring with heat treated Tru-Dual inserts and an MJ Follower Gland. The restraint is installed on the spigot end of the pipe and connects to the MJ Gland and fitting with an array of thrust bolts.