Visit EBAA on Facebook Follow EBAA on Twitter Visit us on Google Plus! Subscribe to EBAA's RSS News Feed
EBAA is American-made
EBAA is American-made
EBAA is American-made

NEWS - 03/09/16

blue angle

EBAA Iron Announces the 54 inch MEGALUG for Restraining Ductile Iron Pipe



EBAA Iron, Inc. announces the 54 inch Nominal Pipe Size MEGALUG® Mechanical Joint Restraint for Ductile Iron Pipe.

The 54 inch MEGALUG has a 200 PSI rating with a 2:1 Safety Factor.

Eastland, Texas – March 9th, 2016 – EBAA Iron, Inc. announces the 1100 Series MEGALUG® Mechanical Joint Restraint is now available for restraining plain-end or spigot end of 54 inch Ductile Iron Pipe (DIP) at Mechanical Joint (MJ) fittings or other  MJ appurtenances with a 200 PSI pressure rating which includes a 2:1 safety factor.

EBAA Iron, Inc., the original and only manufacturer of the MEGALUG has broadened the size range spectrum of the MEGALUG to restrain fifty-four (54) inch ductile iron plain-end pipe to ductile iron MJ pipes, MJ fittings or other pipeline MJ appurtenances. The new 54 inch MEGALUG, like all MEGALUGS from EBAA Iron are 100% Made in the United States of America and meets all applicable AIS requirements for state and federal funded water and or wastewater pipeline projects.

For additional information, refer to EBAA Iron’s website ( or contact the EBAA Iron Representative near you ( You may also contact EBAA Iron Engineering direct at 800.633.9190, and ask for “Engineering”.


Rick Rackow



Click here for all news and updates